Roof Square Footage Calculator

Wood Shakes Roof: Cost & Material Calculator

Calculate exact material quantities, waste allowances, and installed budgets for a wood shakes roof. Explore structural framing requirements, fire/wind ratings, and house-size takeoff tables.

Calculates True AreaFactors in PitchIncludes Waste FactorSquares & Bundles
sq ft
Example preview
Result405 Shingles
Estimated Packs
9 packs
Effective Area per Shingle
784 sq in
Waste Factor Used
10%

Enter your values and press Calculate to see your result.

About Wood Shakes Roofing

Natural, rustic appearance with good insulation properties. Requires more maintenance. When budgeting and measuring for a wood shakes roof, it is critical to account for structural weight, minimum pitch limits, and an accurate 10% cutting waste factor to accommodate rake, ridge, and valley offcuts.

Weight per Square350 to 450 lbs per square (approx. 3.5 to 4.5 lbs/sq ft)
Minimum Slope / Pitch3/12 for shingles (sawn smooth); 4/12 minimum for hand-split wood shakes per IRC R905.8.2
Fire RatingClass C untreated; Class A or B when pressure-impregnated with fire-retardant polymers (required in California and high-hazard fire zones)
Wind Uplift ResistanceTested up to 120–130 mph due to thick overlapping cedar profile and high nail grip
Pricing & Material Takeoff Matrix

Wood Shakes Cost by House Size

The table below illustrates complete turnkey replacement estimates versus wholesale materials-only costs for typical single-story home footprints under a standard pitch with the recommended 10% waste allowance:

Home FootprintEstimated Surface AreaSquares (with Waste)Turnkey InstalledMaterials Only
1,500 sq ft Home1,800 sq ft18.0 sq (order 19.8 sq)$19,600 – $35,000$6,800 – $12,200
2,000 sq ft Home2,400 sq ft24.0 sq (order 26.4 sq)$26,100 – $46,700$9,100 – $16,300
2,500 sq ft Home3,000 sq ft30.0 sq (order 33.0 sq)$32,700 – $58,300$11,400 – $20,400

Framing, Fastening & Underlayment Standards

Structural Framing

Standard 2×6 or 2×8 rafters. Installed over spaced (skip) 1×4 or 1×6 sheathing boards to allow cedar to breathe and dry from beneath.

Fasteners & Attachment

Two hot-dipped galvanized or stainless steel ring-shank nails (type 304/316) per shake placed 1 inch from edge and 1.5–2 inches above buttline.

Underlayment Specification

Mandatory interlayment: an 18-inch-wide strip of #30 asphalt-saturated felt embedded between every course of shakes, positioned twice the exposure length above the butt.

Maintenance Profile

High. Regular debris clearing to prevent fungal rot, moss treatments, and periodic application of breathable wood-preserving oils every 4–6 years.

Key Installation & Architectural Highlights

  • Premium No. 1 Certi-Split Western Red Cedar offers superior natural preservative thujaplicin oils resisting insect infestation and rot.
  • Hand-split shakes feature a textured, rustic exterior face with a sawn back for flat bed seating.
  • Must maintain 3/8-inch to 5/8-inch keyway spacing between adjacent shakes to allow natural wet-dry lateral swelling.
Inspection & Vulnerability Alert: Moss, lichen, and moisture retention. Shaded north-facing roof planes need sunlight access and trimmed tree canopies to prevent early decay.
Got Questions?

Frequently Asked Questions

Clear answers about roof square footage calculations, pitch slope factors, shingle bundles, and ordering materials.

Wood Shakes runs about $980–$1,750 per roofing square turnkey installed, where one square covers 100 square feet. For materials only, expect roughly 35% to 45% of that figure. On a standard 2,000 sq ft home (~25 squares with slope and waste), that works out to roughly $24,500–$43,750 installed ($8,575–$17,500 materials only), depending on roof complexity and local labor rates.

Still have questions about your roof takeoff?

Explore our comprehensive suite of specialized calculators or contact our estimator team for personalized guidance.

Related Estimation Calculators

Roofing Cost Calculator →Compare labor and tear-off costs by zip code.Waste Factor Calculator →Calculate extra bundles for hips, valleys, and rakes.Underlayment Calculator →Size synthetic rolls and ice & water shield rolls.

Compare Other Roofing Materials

Asphalt ShinglesMetal RoofingTile RoofingSlate RoofingSynthetic RoofingBuilt-Up Roofing (Flat)TPO RoofingEPDM Rubber RoofingPVC RoofingSolar Shingles

View all 11 roofing materials & specifications →